Techut

Standard: Comply with USBV1.0, 1.1, 2.0 standards EIA RS-232, RS-422, RS-485 standards,

USB signal: VCC, DATA+, DATA-, GND

RS-232 signal: DB-9, GND, TXD, RXD

RS-422 signal: T+, T-, RX+, RX-

RS-485 signal: A, B

Working mode: asynchronous work, point-to-point or point-to-multipoint, 3-wire communication, 2-wire half-duplex, 4-wire full-duplex

Directional control: automatic data control and automatic control technology to automatically identify and control data transmission direction

Baud rate: 300-921.6Kbps, automatic detection of serial signal rate

Load capacity: support point-to-multipoint per converter allows connection of 128 RS-422 or RS-485 interfaces

device

Transmission distance: USB interface does not exceed 5 meters, RS-232 interface does not exceed 15 meters, RS-422/RS-485

Interface is more than 1200 meters

Interface protection: surge protection, ±15KV static protection

Interface form: USB end B type connector female head, DB9 male connector, 6 position binding post

Signal indication: 2 signal indicator transmission (TXD), reception (RXD)

Transmission medium: DB9 line, twisted pair, shielded line

Document size: 95mm*50mm*31mm

Use environment: -40 ° C to 85 ° C, relative humidity of 5% to 95%

Support Win full range / Linux, etc.

DTECH DT-5011 USB 2.0 to RS232 cable FTDI chip

Feature:

1. Converts USB 2.0 port to RS232 9 Pin Serial port.

2. Standard USB 2.0 type A Male and RS232 serial 9 pin Male interface.

3. USB specification 2.0 compliant

4. Supports over 1Mbps data transfer rate.

5. Supports remote wake-up and power management

6. Available for USB port

7. Support Win98, 2000, XP, Vista ,8,10& Mac OS v8.6 or higher.

8. Length:1.2M

• USB to RS-232 DB9 Serial Adapter, Super Quality Genuine & packed
• A versatile connectivity solution that bridges legacy serial peripheral devices with newer USB-capable computers, the USB to Serial adapter offers broad operating system compatibility including Windows, Linux and Mac OS, for easy integration into mixed environments.
• USB to RS232 Serial DB9 Adapter Cable - Add an RS-232 Serial Port to Your Laptop or Desktop Computer Through USB (Mac OS 10.11/Linux etc.)
• Standard USB Type A Male to standard 9-pin DB9 RS-232 serial connector, Allows any PC to connect serial devices and programs that communicate through COM ports
• OS Supported: Mac OS X LT Capitan / Linux / Andorid [Not compatible with ARM-based Windows (MS Surface)]

• Industrial grade isolated RS232 to RS485 converter for High Speed data communication between DB9 serial COM port and RS-485/422 device (wired via RJ45 socket or 6 position terminal board)
• Provides Power Supply Isolation (optical isolation voltage 2500Vrms 500DC continuity); RS-232 interface - 15kV ESD protection; RS485/422 end with each line of 600W lightning surge protection
• Port-powered or by DC 9V-24V power adapter; LED indicators for troubleshooting - easy check in the status of power connection and balanced differential signal status
• Rack-mounted optocoupler with built-in repeater to amplify signals; with automatic baud rate sensing (300bps to 115200 bps); well housed in metal case ensures rapid heat dissipation
• Bi-directional RS485 to RS232 isolator box supports 4 kinds of data communication: point-to-point/point-to-multilpoint 4-wire full duplex; point-to-point/point-to-multilpoint 2-wire half duplex

• Interface compatible: RS-485, RS-232 standard
•  Material: ABS
• Working mode: asynchronous half-duplex differential transmission
• Protection level: 600W lightning surge protection per line of RS-485 interface
• Transmission medium: twisted pair or shielded wire
• Transmission distance: RS-485 is less than 1200m, RS-232 is within 15m
• Transmission rate: 300-115.2kbps
• Communication mode: point-to-point/two-wire half-duplex, point-to-multipoint/two-wire half-duplex
• Scope of application: suitable for PC, terminal equipment, industrial control, digital instrument acquisition, multi-serial port equipment, serial interface of single-chip microcomputer, etc.
• Dimensions: about 51.8 x 17.8 x 35.7mm
• Weight: about 40g

HEXIN RS232 to RS485 serial port Data interface adapter Converter . It has electronic Interface At the side of RS-232 is a DB9 female(hole-type) connector and at the side of RS-485 is a DB9 male (needle-type) connector with connection board. It has Transmission Speed of 300-115200 bps. Common wire, doule wire, UTP or Shielding Line are used as a transmission Media.

1. Serial Port Feature: Compatible with EIA/TIA RS-232C standard and RS-485 standard
2. Working Modes: Asynchronous, half-duplex, differential transmission
3. Work Environment: -10C to 85C, relative humidity 5% to 95%
4. Transmission Distance: 1.2 mile (RS-485), 5 meters(RS-232)
5. Transmission Speed: 300-115200 bps
6. Transmission Media: Common wire, doule wire, UTP or Shielding Line
7. Serial Port Feature: Compatible with EIA/TIA RS-232C standard and RS-485 standard

1 x RS-232 to RS-485 adapter

1x 3 poles connection board

1 x Users Guide in English.

Standard: Comply with USBV1.0, 1.1, 2.0 standards EIA RS-232, RS-422, RS-485 standards,

USB signal: VCC, DATA+, DATA-, GND

RS-232 signal: DB-9, GND, TXD, RXD

RS-422 signal: T+, T-, RX+, RX-

RS-485 signal: A, B

Working mode: asynchronous work, point-to-point or point-to-multipoint, 3-wire communication, 2-wire half-duplex, 4-wire full-duplex

Directional control: automatic data control and automatic control technology to automatically identify and control data transmission direction

Baud rate: 300-921.6Kbps, automatic detection of serial signal rate

Load capacity: support point-to-multipoint per converter allows connection of 128 RS-422 or RS-485 interfaces

device

Transmission distance: USB interface does not exceed 5 meters, RS-232 interface does not exceed 15 meters, RS-422/RS-485

Interface is more than 1200 meters

Interface protection: surge protection, ±15KV static protection

Signal indication: 2 signal indicator transmission (TXD), reception (RXD)

Transmission medium: DB9 line, twisted pair, shielded line

Document size: 95mm*50mm*31mm

Use environment: -40 ° C to 85 ° C, relative humidity of 5% to 95%

Support Win full range / Linux, etc.

• Industrial grade isolated RS232 to RS485 converter for High Speed data communication between DB9 serial COM port and RS-485/422 device (wired via RJ45 socket or 6 position terminal board)
• Provides Power Supply Isolation (optical isolation voltage 2500Vrms 500DC continuity); RS-232 interface - 15kV ESD protection; RS485/422 end with each line of 600W lightning surge protection
• Port-powered or by DC 9V-24V power adapter; LED indicators for troubleshooting - easy check in the status of power connection and balanced differential signal status
• Rack-mounted optocoupler with built-in repeater to amplify signals; with automatic baud rate sensing (300bps to 115200 bps); well housed in metal case ensures rapid heat dissipation
• Bi-directional RS485 to RS232 isolator box supports 4 kinds of data communication: point-to-point/point-to-multilpoint 4-wire full duplex; point-to-point/point-to-multilpoint 2-wire half duplex

•  RS232/RS485/RS422 (not to be used simultaneously)
•  Wide power supply 5-36v DC
• httpsD client mode, sends serial data in https format
• Support TCP server/client, UDP server/client,Virtual COM